Kurzweil KME-61 VERSION 2 SOFTWARE Supplement

Version 2 software

Hide thumbs Also See for KME-61 VERSION 2 SOFTWARE:

Download this manual See also: Musician's Manual, User Manual

KME-61 VERSION 2 SOFTWARE SUPPLEMENT

• What Is It?

Software version v2 is the latest set of feature enhancements for the KME-61 keyboard.

• What Does It Do?

v2 adds new controller features to the KME-61:

-the ability to program independent controller assignments per zone within a setup.

See the section below marked "Additional features added in v2" for operational details.

• How Do I Know If I Have v2?

If you received this document along with the purchase of a KME-61, then the v2 software

should already be installed in your unit. If you did not receive this document along with your

instrument or if you just want to confirm things, you can check what version of software you

currently have installed by doing the following:

1) turn KME-61 on

2) while powering up, you will see the current software revisions installed in your unit

3) if your unit has v2 (front software), you will see the following in the display:

• Where Can I Get It If I Don't Have It?

Please visit your local authorized Kurzweil Music Systems service center to have v2 installed.

To locate a service center near you please visit our website at:

http://www.kurzweilmusicsystems.com/support-service-center-search.html?Id=296

For further information please contact:

Email=

support@kurzweilmusicsystems.com

Web= www.kurzweilmusicsystems.com

-Jan. 2004-

(i.e. what are the new features in v2?)

FRONT

ENGINE VER

VER 2.01

1.10

Page 1 ENGINE VER • Where Can I Get It If I Don’t Have It? Please visit your local authorized Kurzweil Music Systems service center to have v2 installed. To locate a service center near you please visit our website at: http://www.kurzweilmusicsystems.com/support-service-center-search.html?Id=296...
Page 2 KME-61 Addendum Additional features added in v2 Per Zone Controller Assignments: When in Setup Mode, using the previous v1.xx software, all physical controllers, including the optional pedals, worked the same for all zones simultaneously and were always enabled. To improve live performance usefulness, Version 2 software allows controllers to be reassigned or turned off on a per-zone basis.
Page 3 12. Pitch Wheel Press the Menu Down button once again to see the Edit Pitch Wheel screen. Z1:Edit Pitch Wheel PWheel: On This parameter allows you select which zones are affected by the pitch wheel. Select the zone and on/off setting as with Mono Pressure described above. Each of the remaining controllers has two parameters: MIDI Controller Number and Entry Value which is the initial value sent when the setup is selected.
Page 4 KME-61 Addendum The parameters, editing method and available values are the same as for the data slider. The default MIDI Controller Number for CC Pedal is 11 (Expression). Please pay special attention to the Entry Value for this parameter. If it is set to a small value or Zero, the zone will be silent until the CC pedal is moved.