Table of Contents
Advertisement
Selecting Setups
Setup List
Press [Program/Setup] button a few times till its LED changes to green. Press correspondingly
numbered Sound Select buttons to select desired one from the SP2's 16 setups. The display will
show the ID number of the selected setup (S01~S16) like <Figure 3‐5>
Rhythm Patterns and Metronome
Selecting Rhythm Patterns
The SP2 has 60 types of pre‐recorded drum patterns, as well as a metronome. When used with
these features, the [+/Yes] and [‐/No] buttons below the display function as [Play] and [Stop]
buttons. To select a drum pattern, press [Rhythm/Metronome] button to enter Rhythm Selection
mode and use Sound Select buttons to select desired patterns.
The upper 8 buttons in Category region are used to select the genre of the drum patterns and
the lower 8 buttons are used to select 8 variations of each genre. The pattern list is like
following:
< Chart 3‐2 >
< Figure 3‐5 Selecting Setups >
< Figure 3‐6 >
Chapter 3
SP2 Performance Features
３-7
Advertisement
Table of Contents
Troubleshooting
