Care And Cleaning; Cooktop Surface; Sealed Surface Burners - Jenn-Air pro-style Use And Care Manual

CARE AND CLEANING

IMPORTANT:
Before cleaning, make sure all controls are OFF and the
■
oven and cooktop are cool. Do not use oven cleaners,
bleach, or rust removers.
Soap, water, and a soft cloth or sponge are suggested first
■
unless otherwise noted.

COOKTOP SURFACE

After Each Use:
1.
Wipe off cooktop, grates, and caps.
2.
Clean food spills.
To preserve the finish, clean food spills containing acids,
such as vinegar and tomato, as soon as the entire appliance
is cool.

SEALED SURFACE BURNERS

1.
Remove burner cap and base.
2.
Clean gas opening with damp cloth.
28
3.
Clean clogged burner ports.
Use a straight pin. Do not enlarge or distort the port. Do not
use a wooden toothpick. If the burner needs to be adjusted,
contact a trained repair specialist.
4.
Replace burner cap.
Stacked Power Burner
1
2
Medium Burner
1
2
Simmer/Melt Burner
1
2
Make sure alignment pins are properly aligned with burner cap.
5.
Turn on burner.
If the burner does not light, check cap alignment. If the
burner still does not light, do not service the sealed burner
yourself. Contact a trained repair specialist.
Incorrect
1
Correct
2
Incorrect
1
Correct
2
Incorrect
1
Correct
2