Table of Contents
Advertisement
Enter Program Mode
OPERATION (continued)
PROGRAMMING INSTRUCTIONS
1. Press TEMP and TIME keys together for 3 seconds to enter the
programming mode.
2. "PrOg" is displayed - Scroll "Up" or "Down" using the UP ARROW
key or DOWN ARROW key to the desired menu number
"Pr- ##" is displayed. For example "PrOl " is program #1.
3. Press TEMP key - The "temp" value is displayed.
4. Use the UP ARROW key or DOWN ARROW key to change the
temperature value being displayed.
5. Press TEMP key again to save this new value:
NOTE: a (1) second beep acknowledges the change and "Pr - ##"
is displayed.
6. Press "Time" button - The "time" value is displayed.
7. Use the UP ARROW key or DOWN ARROW key to change the
time value being displayed.
8. Press the TIME key again to save this new value.
9. Repeat steps 2 - 8 to program up to a maximum of 40 menus; or,
Press START/STOP key to exit the programming mode and start
preheating to cook temperature setpoint of the last menu number
that was programmed.
TEMPERATURE
To view the actual oil temperature press the TEMP key once.
To view the programmed oil temperature press the TEMP key twice.
TIME
To view the programmed time press the TIME key once.
CANCEL A COOKING CYCLE
To cancel a cook cycle press the START/STOP key. The cooking cycle
will be cancelled and the basket will rise. The unit will return to the
ready state.
PAUSE (Manually Lifting the Basket During a Cooking Cycle)
To pause the cooking timer to check the product, press the UP ARROW
key momentarily. The display will read "PAUSE", and the cooking timer
is paused. Manually lift the basket to check product.
To resume cooking, press the DOWN ARROW key. The cooking timer
will finish counting down.
page 6 of 10
Advertisement
Table of Contents
