Advertisement
Quick Links
Advertisement
Related Manuals for Wells F-49
Summary of Contents for Wells F-49
- Page 1 ELECTRIC FRYER MODELS MODELS F-49, F-55, F-556, F-67, F-676 AUTOFRY MODELS Models F-55, F-586, F-68, F-686 • OPERATION • INSTALLATION • MAINTENANCE MANUAL WELLS MANUFACTURING COMPANY P.O. BOX 280 VERDI, NEVADA 89439 (702) 345-0444 • FAX (702) 345-0569 ITEM NO. 47813...
-
Page 2: Table Of Contents
TABLE OF CONTENTS DESCRIPTION PAGE Warranty ........................................3 Shipping Damage Claim Procedure ................................. 4 Warnings!........................................5 Features ........................................6 Installation Instructions ..................................6-7 Operating Instructions ..................................7 - 8 Cleaning Instructions....................................8 Warranty Exclusions ....................................9 page 2... -
Page 3: Warranty Statement
Seller's obligation under this warranty is limited to the repair of defects without charge by a WELLS' Factory Authorized Service Agency or one of its sub-service agencies and is limited to a 60 mile radius to the nearest Authorized Service Agency or one of its sub-service agencies. -
Page 4: Shipping Damage Claim Procedure
SHIPPING CLAIM PROCEDURE: For your protection, please note that equipment in this shipment was carefully inspected and packed by skilled personnel before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of this shipment. IF SHIPMENT ARRIVES DAMAGED: 1. -
Page 5: Warnings
WARNINGS!! IMPORTANT!! Make sure incoming voltage is the same as unit is rated for. An electrical specification plate specifying rated voltage, wattage, Hz and phase of unit is attached to the front panel. Plugging unit into greater voltage than unit is rated for may cause severe damage to the thermostatic control, elements and other components. -
Page 6: Electric Fryer Features
ELECTRIC FRYER FEATURES: "ON/OFF" Switch & Temperature Control: Automatically regulates temperature of frying oil and eliminates an over and under heating condition. Temperature control is adjustable from "OFF" to 375°F. NOTE: Models F-68, F-686, F-67, and F-676 are equipped with dual controls, each independent of the other, to regulate the temperature for each frypot. -
Page 7: Operating Instructions
"OFF" position and allow the oil to cool. Press the red re-set button located on the back of the element control housing and turn the temperature control knob to the desired setting. If a high-limit condition re-occurs, have the fryer checked by a qualified Wells Service Agent. OPERATING INSTRUCTIONS: Pour liquid oil into the frypot to the top of the smaller expansion zone. -
Page 8: Cleaning Instructions
Final rinse with plain water. NOTE: Wells does not recommend that heating elements be turned "ON" while in the up position, as this will cause additional carbonization and greatly reduce heating elements life; in addition, cause a personnel hazard. -
Page 9: Warranty Exclusions
10. All genuine Wells replacement parts are warranted for ninety (90) days from date of purchase on non-warranty equipment. This parts warranty is limited only to replacements of the defective part. Any use of non-genuine Wells parts completely voids any warranty.