Standard Controls For Models Bcx-14 And Bx-14 - Blodgett BCX-14G Installation Operation & Maintenance

Figure 12

Standard Controls for Models BCX-14 and BX-14

CONTROLS IDENTIFICATION
1. MODE SELECTOR SWITCH - turns power to the
oven on or off. Allows selection of Steam, Hot Air,
Combi or Cool Down Modes.
2. DISPLAY - displays time and temperature informa-
tion.
3. TEMPERATURE DIAL - used to set desired cooking
temperature.
4. HEAT LAMP - lights when the oven is calling for heat
5. TIMER LED - lights when the cook time is displayed
6. PROBE ACTUAL LED - lights when the actual probe
temperature is displayed
7. PROBE SETPOINT LED - lights when the core set-
point temperature is displayed
8. TIMER/PROBE KNOB - use to select and set either
cook time or probe temperature
9. STEAM ON DEMAND DISPLAY - displays the steam
on demand time
10. STEAM ON DEMAND LAMP - lights when steam on
demand is activated.
11. STEAM ON DEMAND KNOB - use to set duration for
steam on demand
12. LIGHTS KEY - press to turn the oven lights on and off
13. FAN SPEED KEY - used to select fan speed.
14. CAVITY VENT KEY - used to open or close vent to
release steam from cavity. The vent is open when the
LED is lit.
15. DELIME LAMP (BCX-14 ovens only) - Flashes when
steam generator deliming is needed. Remains steady
when deliming process is active.
16. FILL LAMP - illuminated until the steam generator is
filled with water.
NOTE: Model BX-14 ovens do not have a fill lamp.
17. PROBE CONNECTION - used to connect the core
temperature probe to the control.
19
Operation