Chapter 4 Hardware Interfaces; The Connector Panel - KVH Industries TracPhone FB250 Installation Manual

Hardware interfaces

4.1 The connector panel

The connector panel is placed at one end of the terminal and has the following
connectors:
Phone/Fax 1
• 1 L-Band connector for reception of maritime data
• 1 Antenna connector (TNC)
• 2 Phone/Fax connectors (Port 1 is closest to the antenna connector)
• 1 ISDN connector
• 4 LAN connectors with Power over Ethernet (PoE)
• 1 DC power input connector for connection to 10.5-32 V DC, with optional
remote on/off
• 1 Input/Output connector with 5 inputs/outputs for external control or
signaling
• 1 ground stud with wing nut
For information on how to connect to a specific interface, see the next
sections.
Phone/Fax 2
Chapter 4
4
55