Nortel 8600 Installation Manual page 51

ATTENTION
The 8005AC and 8005DI AC power supplies require a modified air intake bezel.
If you have installed Model 8005AC or 8005DI AC power supplies (1462 W)
in the 8010co chassis and have an air intake bezel imprinted with 312096-A,
or if you have difficulty installing the bezel over the 8005AC or 8005DI AC
power supplies, you can order the modified bezel model 321325-A (Order Code
DS1411027-E6).
Procedure steps
Step
1
2
3
Copyright © 2008 Nortel Networks
.
Replacing the 8010co chassis bottom bezel model 321325-A 51
Action
Insert the three bottom bezel tabs behind the return flange on
the power module.
Place the top of the bezel against the chassis.
Align the captive screws with the holes on the front of the
chassis.
Nortel Ethernet Routing Switch 8600
Installation — AC Power Supply
NN46205-306 02.01 Standard
30 May 2008