Lorex SG21CD7484UQ–A80 Instruction Manual page 14

21” color 2 page / 8 channel quad / dvr combo with 80gb hdd & internet remote security monitoring
Table of Contents

Advertisement

(iii) SENSITIVITY : Select the level of the Motion Sensing's sensitivity level by channel.
(iv) AREA : Select the area of the screen where the Pixel Motion Sensing feature will be active.
The digits below represent the area on the screen where motion is detected.
[ 00 ] - Whole screen.
[ 01 ] - Top left side of screen.
[ 02 ] - Top right side of screen.
[ 03 ] - Bottom left side of screen.
[ 04 ] - Bottom right side of screen.
[ 05 ] - Center of the screen.
00
6. SYSTEM SET ( l ) -This sub-menu allows you to configure various preferences on the system, related to
(i) KEY BUZZER: When set to [Y], the system will make a sound when a key is pressed on the remote
(ii) LOSS BUZZER: When set to [Y], the system will make a sound when a camera becomes
(iii) QUAD LINE: Activates and deactivates the border line in Quad mode.
(iv) BLANK COLOR: Choose between blue, gray or black as the background screen color in
(v) SLAVE OUT : When set to [ACTUAL], the system will output what is shown on-screen to another monitor
connected via the Slave Output. When set to [QUAD], the slave monitor will display Quad
mode, regardless of what's appearing on the screen of the DVR Combo.
(vi) TITLE/TIME: Change the location of on-screen display for Time/Date and camera titles. T/R/B/L
represent Top / Right / Bottom / Left respectively. Therefore, for example, the setting
"TR/BL" would display the Title in the Top-Right corner of the screen, and the Time in
the Bottom Left corner.
(vii) PAN/TILT(CH1) : Activates Pan/Tilt mode to become accessible. For more information on Pan/Tilt
(viii) ALARM OUT : Select the Alarm Out setting, which is defaulted to NO (Normally Open) for triggering
(ix) DEFAULT SET: Selecting [Y] resets all programmed settings back to the default factory settings
Level 05 is the highest sensitivity, Level 01 is the least sensitive.
Level 00 deactivates Motion Sensing.
Monitor settings.
control or on the main panel of the monitor.
disconnected.
Menu Mode.
mode, refer to page 15.
external devices.
(except for the time & date).
01
02
03
04
05
-10-

Advertisement

Table of Contents
loading

Table of Contents