Panasonic ER-GC70 Operating Instructions Manual page 6

Cleaning
Cleaningwithbrush
1.Disconnectthepowercordfromthe
clipper.
• Be sure to set the switch to "0" before you
remove the blade.
2.Removethecombattachment.
3.Holdthemainbody,placeyourthumb
againstthebladesandthenpush
themawayfromthemainbody.
4.Brushoffanyhairtrimmingsfromthe
mainbodyandfromaroundtheblade.
5.Brushanyhairtrimmingsoutfrom
betweenthestationarybladeandthe
movingbladewhilepressingdown
thecleaninglevertoraisethemoving
blade.
Cleaninginwater
The mark on the left means suitable for cleaning under
an open water tap.
Warning
Disconnectthepowercordfromtheclipperbeforecleaning
itinwatertopreventelectricshock.
6
1.Disconnectthepowercordfromthe
clipper.
2.Removetheblade.
3.Rinseoffanyhairtrimmingsthatare
stickingtothebladeswithrunning
water.
4.Rinseoutanyhairtrimmingsthatare
insidetheclipperwithrunningwater.
5.Gentlyshaketheclipper4or5timesandthenwipeoff
anywaterdropsfromtheclipperandtheblade.
6.Placetheclipperonatowelwiththepowerswitchon
themainbodyfacingdownwardstoletitdryfully.
Lubrication
Apply the oil to the clipper before and
after each use.
Apply a drop of the oil to the points
indicated by the arrows.
Remountingtheblade
Fit the mounting hook into
the blade mounting on the
clipper and then push in until
you hear a click.