Overview; Special Product Features; Operation - Metabo BSZ 9.6 Operating Instructions Manual

Ensure that the spot where you wish to work is
free of power cables, gas lines or water pipes
(e.g. using a metal detector).
Keep battery packs dry.
Do not use any damaged or deformed battery
pack.
Do not expose battery packs to fire.
Do not break into battery packs.
Do not touch battery pack contact terminals or
short-circuit them.
Caustic fluid may leak from defective
NiCd or NiMH battery packs
(30% caustic potash solution)!
Slightly acidic, flammable fluid may leak
from defective Li-Ion battery packs!
If battery fluid from NiCd, NiMH or Li-Ion battery
packs leaks out and comes into contact with the
skin, rinse the affected area thoroughly with
water. If battery fluid leaks out and comes into
contact with your eyes, wash them with clean
water and seek medical
treatment immediately!
Machines with the designation BSZ...:
Only use suitable Metabo chucks
(order no. 3.01.00.303.0) when using the machine.
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory
diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in conjunc-
tion with additives for wood conditioning (chromate,
wood preservative). Material containing asbestos
must only be treated by specialists.
- Where the use of a dust extraction device is
possible it shall be used.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.

5 Overview

See page 3 (please unfold).
1 Rapid-action keyless chuck
2 Selector barrel (torque, drilling, impact
drilling)*
3 Rocker switch for impulse function*
4 Slide-switch (1st/2nd gear)
5 Battery-pack release button
6 Battery pack
7 Depot for screwdriver bits
8 Trigger switch
9 Changeover switch (direction of rotation
setting, transporting safety device)
* depending on equipment

6 Special Product Features

Metabo impulse mode
(depending on equipment).
Optional pulse mode for precise fastening and
convenient drilling.

7 Operation

Charge the battery pack before use.
NiCd and NiMH: The battery pack reaches its
full capacity only after being charged and
discharged 5 times (charge cycles).
The maximum number of charge cycles can
only reached if an exhaustive discharge of the
battery pack is avoided. If performance dimin-
ishes, recharge the battery pack.
Store NiMH battery packs when charged and
recharge after 6 months at the latest.
Li-Ion battery packs (14.4 V and 18 V)
have a capacity and signal display:
- Press the button and the charge level is
displayed by the LEDs.
- If one LED is flashing, the battery pack is
almost flat and must be recharged.
- If all LEDs are flashing, the electronic system
has switched off the battery pack (self-
protection mode).The battery pack is either
flat (the electronic system protects the
battery pack against exhaustive discharge),
or has become overloaded or too warm
during operation (temperature monitoring).
To continue using the battery pack: Press the
button or insert the battery pack into the
charger, which is ready for use. (Rapid
cooling is possible in the "AIR COOLED"
battery charger.)
Li-Ion battery packs (12 V)
- If the battery pack is either flat, or has become
overloaded or too warm during operation, then
the electronic system switches the battery pack
off (self-protection mode). To continue using the
battery pack: Insert the battery pack into the
charger, which is ready for use. (Rapid cooling
is possible in the "AIR COOLED" battery
charger.)
ENGLISH
ENG
11