Husqvarna CR 125 2010 Manual page 124

it is necessary ABSOLUTELY TO AVOID THAT
HIGH PRESSURE JETS OF WATER OR AIR come
to contact with THE ELECTRICAL PARTS, espe-
cially the electronic control unit (1).
WR
1
60
After washing:
- Lubricate the points listed in the Maintenance Table (Appendix A).
- Start the engine and run it for 5 minutes.
- Test the brakes before riding the motorcycle.
WARNING*: Never wax or lubricate the
brake disc. Loss of braking and an accident
could result. Clean the disc with an oilless
solvent such ans acetone. Observe the sol-
vent warnings.
CR