Escape Code - Nortel Meridian M3905 User Manual

Keyboard dialing

Escape code

To change Escape code:
M
F
E
Y
X
E E E E s s s s c c c c
E E E E s s s s c c c c
14
<CR>
<CR>
<CR>
<CR>
<CR>
E E E E s s s s c c c c
1. Select M (Modify) and press the
Carriage Return.
Terminal displays Modify menu.
2. Select (Script File) and press the
F
Carriage Return.
Terminal displays Script File menu.
3. Select E (Escape Code) and press the
Carriage Return.
ESCAPE CODE =[+] MODIFY (Y/N)
4. Select Y and press the
Return.
ENTER ESCAPE CODE
5. Enter the new Escape code (can be a
control character) and press the
Carriage Return.
There are three uses for the Escape code
character:
Note: A guard timer of one second
distinguishes the escape sequences. In
other words, one escape character is not
interpreted as a pause until a full second
elapses in which you do not enter another
escape character.
— One character inserts a pause in
escape
a script file.
— Two escape characters puts you into
privacy mode, useful for skipping part of
a script file procedure for password
protection.
Carriage