Rear Door Assembly Components
a
(a)
b
(a)
b
a
(a)
1. Door panel
2. Door hinge
: Apply lithium grease 99000-25011 to rotating part.
: Apply sealant 99000-31110 to contact face.
3. Door open stopper
Rear Door Assembly Removal and Installation
Refer to "Front Door Assembly Removal and Installation" as removal and installation procedures are basically the
same. However, note the following.
• Tighten rear door hinge bolts and nuts to specified torque referring to "Rear Door Assembly Components".
2
4
(a)
3
(b)
5
(a)
2
4
(a)
4. Rear door hinge nut
5. Door open stopper bolt
6. Rear door opening weather-strip
Hood / Fenders / Doors:
S7RW0A9A06007
1
6
I6RW0B9A0005-01
: 23 N⋅m (2.3 kgf-m, 17.0 lb-ft)
: 21 N⋅m (2.1 kgf-m, 15.5 lb-ft)
a, b: Rear door hinge bolt
Loosen and tightening order: a→b
S7RW0A9A06008
9J-5