Suzuki SX4 Service Manual page 1558

9K-19 Body Structure:
Panel to panel distance
[A]: Hatchback model
[B]: Sedan model
a: 0 – 1.5 mm (0 – 0.059 in.)
b: 2.7 – 4.7 mm (0.106 – 0.185 in.)
c: 3.6 – 5.6 mm (0.142 – 0.220 in.)
d: 1.0 – 3.0 mm (0.039 – 0.118 in.)
(Vehicle with splash guard)
: 2.0 – 3.0 mm (0.079 – 0.118 in.)
(Vehicle without splash guard)
e: 4.8 – 6.8 mm (0.189 – 0.268 in.)
f: 4.0 – 6.0 mm (0.157 – 0.236 in.)
g: 3.6 – 5.6 mm (0.142 – 0.220 in.)
h: 3.6 – 5.6 mm (0.142 – 0.220 in.)
i: 4.8 – 6.8 mm (0.189 – 0.268 in.)
j: 4.0 – 6.0 mm (0.157 – 0.236 in.)
k: 3.5 – 5.5 mm (0.138 – 0.217 in.)
l: 3.5 – 5.5 mm (0.138 – 0.217 in.)
m: 4.0 – 6.0 mm (0.157 – 0.236 in.)
n: 4.1 – 6.1 mm (0.161 – 0.240 in.)
Tightening Torque Specifications
NOTE
The specified tightening torque is also described in the following.
"Cowl Top and Front Lower Crossmember Components"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
o: 0 – 1.0 mm (0 – 0.039 in.)
p: 5.2 – 7.2 mm (0.205 – 0.283 in.) (Hatchback model)
6.2 – 8.2 mm (0.244 – 0.323 in.) (Sedan model)
q: 2.0 mm (0.079 in.)
r: 7.5 – 9.0 mm (0.295 – 0.354 in.)
s: 5.0 – 7.0 mm (0.197 – 0.276 in.)
t: 4.0 – 6.0 mm (0.157 – 0.236 in.)
u: 1.0 – 3.0 mm (0.039 – 0.118 in.) (Vehicle with splash
guard)
v: 1.0 – 3.0 mm (0.039 – 0.118 in.)
(Vehicle with splash guard)
w: 1.0 – 3.0 mm (0.039 – 0.118 in.)
(Vehicle with splash guard)
x: 1.0 – 3.0 mm (0.039 – 0.118 in.)
(Vehicle with splash guard)
y: 4.1 – 6.1 mm (0.161 – 0.240 in.)
z: 2.8 – 4.8 mm (0.110 – 0.189 in.)
aa: 2.5 – 4.5 mm (0.098 – 0.177 in.)
bb: 1.0 – 3.0 mm (0.039 – 0.118 in.)
cc: 7.7 – 9.2 mm (0.303 – 0.362 in.)
dd: 6.3 – 8.3 mm (0.248 – 0.327 in.)
ee: 3.5 – 5.5 mm (0.138 – 0.217 in.)
S7RW0A9B07003