Hyundai 2016 Azera Owner's Manual page 51

To install a child restraint system on
the outboard or center rear seats, do
the following:
1. Place the child restraint system on
the seat and route the lap/shoulder
belt around or through the restraint,
following the restraint manufactur-
er's instructions. Be sure the seat
belt webbing is not twisted.
2. Fasten the lap/shoulder belt latch
into the buckle. Listen for the dis-
tinct "click" sound.
Position the release button so that it
is easy to access in case of an emer-
gency.
OEN036101
3. Pull the shoulder portion of the
seat belt all the way out. When the
shoulder portion of the seat belt is
fully extended, it will shift the
retractor to the "Automatic Locking"
(child restraint) mode.
Safety features of your vehicle
OEN036102
4. Slowly allow the shoulder portion of
the seat belt to retract and listen for
an audible "clicking" or "ratcheting"
sound. This indicates that the retrac-
tor is in the "Automatic Locking"
mode. If no distinct sound is heard,
repeat steps 3 and 4.
OEN036103
3 31