Hyundai 2016 Azera Owner's Manual page 129

To adjust the Zone setting:
1. Determine the desired
Number based upon your current
location on the Zone Map.
2. Press and hold the button for 6
seconds, the current
Number will appear on the display.
3. Pressing and holding the
again will cause the numbers to
increment (Note: they will repeat
...13, 14, 15, 1, 2, ...). Releasing
the button when the desired Zone
Number appears on the display
will set the new Zone.
4. Within about 5 seconds the com-
pass will start displaying a com-
pass heading again.
There are some conditions that can
cause changes to the vehicle mag-
Zone
nets, such as installing a ski rack or
a CB antenna. Body repair work on
the vehicle can also cause changes
to the vehicle's magnetic field. In
Zone
these situations, the compass will
need to be re-calibrated to quickly
button
correct these changes. To re-cali-
brate the compass:
1. Press and hold the
more than 9 seconds. When the
compass memory is cleared a "C"
will appear in the display.
2. To calibrate the compass, drive
the vehicle in 2 complete circles at
less than 5 mph (8 km/h).
Features of your vehicle
Integrated HomeLink
Control System
The HomeLink
System provides a convenient way to
replace up to three hand-held radio-
frequency (RF) transmitters with a
single built-in device. This innovative
feature will learn the radio frequency
codes of most current transmitters to
operate devices such as gate opera-
tors, garage door openers, entry
door locks, security systems, even
button for
home lighting. Both standard and
rolling code-equipped transmitters
can be programmed by following the
outlined procedures.
®
HomeLink information can be found
at: www.homelink.com or by calling
1-800-355-3515.
®
Wireless
® Wireless Control
Additional
4 49