Blind Spot Detection System (Bsd) - Hyundai 2016 Azera Owner's Manual

BLIND SPOT DETECTION SYSTEM (BSD) (IF EQUIPPED)
Blind spot area
Closing at
high speed
The Blind Spot Detection System
(BSD) uses a radar sensor to alert
the driver.
It senses the rear side territory of the
vehicle and provides an indication to
the driver if it detects an object
approaching from these areas.
(1) BSD (Blind Spot Detection)
The warning range depends on
your vehicle speed. However, if
your vehicle is much faster than
the other vehicle, the system will
not warn you.
(2) LCA (Lane Change Assist)
If the system detects a vehicle
approaching you at high speed,
the system will warn you.
(3) RCTA (Rear Cross Traffic Alert)
If the sensor
approaching vehicle from the left
and right side as your vehicle
moves rearward, the system will
warn you.
WARNING
OVI053129
• Always check the road condi-
tion while driving for unex-
pected situations
though the
Detection System (BSD) is
operating.
(Continued)
• The Blind Spot Detection
System (BSD) is a supplemen-
tal system to assist you. Do
not solely rely on the system
and always pay attention and
drive safely.
• The Blind Spot Detection
System (BSD) is not a substi-
tute for proper and safe driv-
ing. Always drive safely and
detects an
use caution when changing
lanes or backing the vehicle
up. The Blind Spot Detection
System (BSD) may not detect
every object alongside the
vehicle.
WARNING
even
As the Blind Spot Detection
Blind Spot
(BSD) system is a supplemental
device for your safe driving, it
may be dangerous to rely on
only the BSD information when
(Continued)
changing the lane. Always pay
attention to drive safely.
Driving your vehicle
5 57