Table of Contents
Advertisement
Name and Function of Each Part
Front panel
1 2
1 1/u
Turns on the power.
2 ON-STANDBY indicator
Lights red when the processing amplifier is in standby
(power-on standby) mode. Goes off when the power is
turned on.
3 Remote sensor
4 SURROUND ON/OFF
Applies the surround effects.
5 a DIGITAL input indicator
Lights when the input audio signal is processed for
Dolby Digital while Surround is ON. Does not light
even for Dolby Digital DVD software when the input
audio signal is processed for Dolby Pro Logic.
6 SURROUND MODE (UP/DOWN)
Selects the surround mode.
7 MASTER VOLUME
Adjusts the volume.
8 DISPLAY
Switches the display between the currently selected
surround mode and the input signal (OPTICAL or
COAXIAL) each time it is pressed.
3
4
ON–STANDBY
COAXIAL
DISPLAY
SURROUND
ON/OFF
BASS
BOOST
9
0
!¡
8
5
6
a DIGITAL
OPTICAL
SET UP
CURSOR MODE
SURROUND
MODE
UP
DOWN
!™
!£
!¢
9 BASS BOOST
Reinforces the bass sound.
0 COAXIAL
Press to listen to the audio from the component
connected to the DIGITAL COAXIAL IN jack.
!¡ OPTICAL
Press to listen to the audio from the component
connected to the DIGITAL OPTICAL IN jack.
!™ Display
!£ SET UP
Sets the speaker connection status, position and
distance.
!¢ CURSOR MODE
Selects the "LEVEL ADJUST", "EQUALIZER" or
"SURROUND" menu.
!∞ CURSOR (
V
/
v
/
B
/
Selects the setting contents after selecting the item to
be set with SET UP or CURSOR MODE.
7
MASTER VOLUME
MIN
MAX
CURSOR
!∞
b
)
EN
37
Advertisement
Table of Contents
