Adjusting The Speaker Treble And Bass Frequencies - Sony TAD-M30 Operating Instructions Manual

Adjusting the speaker treble and bass
frequencies — EQUALIZER
This function lets you adjust the levels of specified
frequencies to create the desired sound.
The EQUALIZER menu "EQ" parameters and their
functions are as follows.
Item Adjustment contents
BASS FREQ Selects the bass frequency (99 to 992 Hz) to be
adjusted.
BASS GAIN Adjusts the bass frequency level.
TREB FREQ Selects the treble frequency (1.0 to 8.6 kHz) to
be adjusted.
TREB GAIN Adjusts the treble frequency level.
1
Select the desired surround mode (see page 24)
and play the DVD.
2
Press CURSOR MODE repeatedly until "EQUALIZER"
appears in the display.
"CURSOR z EQ" lights in the display.
3
Adjust the bass frequencies (99 to 992 Hz).
1 Press CURSOR
V v
/ repeatedly until "BASS FREQ"
appears in the display.
2 Press CURSOR
B b
/ to select the frequency you
want to adjust.
3 Press CURSOR
V v
/ repeatedly until "BASS GAIN"
appears in the display.
4 Press CURSOR
B b
/ to adjust the level.
*
You can adjust the level in 1 dB steps within the range of
±10 dB.
2 3,4
CURSOR EQ
CURSOR EQ
4
Adjust the treble frequencies (1.0 to 8.6 kHz).
1 Press CURSOR
V v
/ repeatedly until "TREB FREQ"
appears in the display.
2 Press CURSOR
B b
/ to select the frequency you
want to adjust.
3 Press CURSOR
V v
/ repeatedly until "TREB GAIN"
appears in the display.
4 Press CURSOR
B b
/ to adjust the level.
*
You can adjust the level in 1 dB steps within the range of
±10 dB.
z
Customized surround mode sounds are stored in the memory
for about 1 week even if you unplug the power cord of the
processing amplifier.
To change a customized surround mode, select and adjust the
respective surround mode again.
CURSOR EQ
CURSOR EQ
EN
31