Table of Contents
Advertisement
Rear panel
!¡
1 DIGITAL OPTICAL IN
Connects a DVD player to the processing amplifier
using an optical cable.
2 DIGITAL OPTICAL OUT
Connects an MD deck or other digital component
when digitally recording the audio from a DVD
player. Use an optical cable.
Notes
• If you do not connect the DVD player to the DIGITAL
OPTICAL IN jack, sound is not output from the DIGITAL
OPTICAL OUT jack.
• Many types of DVD software cannot be digitally recorded.
In these cases, an analog recording is made even if the DVD
player is connected using an optical cable.
• You cannot digitally record 5.1ch DVD software.
3 AU BUS
Connects the DHC-MD717 stereo system to the
processing amplifier.
4 SPEAKER SELECTOR (FRONT, REAR, MD717 ONLY)
Set to "REAR" (or "MD717 ONLY" when using the
DHC-MD717) during 5.1ch surround or to "FRONT"
during 3ch surround.
1
2
3
AU BUS
SPEAKER SELECTOR
FRONT
FRONT
WOOFER
DIGITAL
OUT
OUT
OPTICAL
COAXIAL
OPTICAL
IN
IN
OUT
L
+
–
R
6
7
8
5 CENTER SPEAKER
Connects the center speaker.
6 DIGITAL COAXIAL IN
Connects a DVD player to the processing amplifier
using a coaxial digital connecting cable.
7 FRONT OUT
Connects to the audio input jacks for external
components of a stereo system or stereo amplifier
during 5.1ch surround.
8 WOOFER OUT
Connects the sub woofer.
9 SPEAKER
Connects the speakers (front or rear).
0 AC power cord
!¡ VOLTAGE SELECTOR
Switches the voltage.
4
5
SPEAKER
REAR
MD717
ONLY
CENTER
SPEAKER
R
L
+
–
!º
9
EN
39
Advertisement
Table of Contents
