Table of Contents
Advertisement
Rear speaker (R)
2
Connect the rear left (L) speaker.
Connect the speaker cord to the SPEAKER (L)
terminals in the same manner as step 1.
3
Connect the center speaker.
Connect the speaker cord to the CENTER SPEAKER
terminals in the same manner as step 1.
4
Set SPEAKER SELECTOR to match the connected
components.
When using the DHC-MD717:
/ Set to "MD717 ONLY".
When using a different stereo system or a stereo
amplifier:
/ Set to "REAR".
SPEAKER
SPEAKER SELECTOR
FRONT
REAR
Sub woofer
MD717
ONLY
Center speaker
Rear speaker (L)
5
Connect the sub woofer.
Connect the audio cord to the left (L) channel of the
line input jack on the sub woofer and the WOOFER
OUT jack on the processing amplifier. Insert the plugs
firmly, pushing them in all the way.
Not pushed in all the way
Insert completely
Connecting the power cord to an AC
outlet
When you have finished all the connections, plug the
power cord of the processing amplifier into an AC outlet.
Note
When you want to use only the stereo system, turn off the
DVD player and the processing amplifier. If you leave the
DVD player and processing amplifier power on, this may
cause noise during radio reception.
N.G.
OK
EN
11
Advertisement
Table of Contents
