Table of Contents
Advertisement
Speaker and Sub Woofer Set Up
3
Set the distance to the center speaker.
1 Press CURSOR
V
v
/
repeatedly until "CENTER
*
5.0
meter" appears in the display.
*
The value set last is displayed.
2 Press CURSOR
B
b
/
to set the distance from the
listening position to the center speaker.
You can set the distance in 0.1 m (10 cm) steps up to
–1.5 m starting from the front speaker position set
in step 2. (For example, if you placed the front
speakers at a position of 6.0 m, you can place the
center speaker within the range of 4.5 to 6.0 m.
Note that you cannot place the center speaker
farther away from the listening position than the
front speakers.)
If you have placed the center speaker outside of
range a in the illustration below, relocate the
center speaker so that it is within range a.
1.5 m
L
C
LS
EN
14
a
a
R
S.W
Input this
distance.
RS
4
Set the distance to the rear speakers.
1 Press CURSOR
V
v
/
repeatedly until "REAR
*
5.0
meter" appears in the display.
*
The value set last is displayed.
2 Press CURSOR
B
b
/
to set the distance from the
listening position to the rear speakers.
You can set the distance in 0.1 m (10 cm) steps up to
–4.5 m starting from the front speaker position set
in step 2. (For example, if you placed the front
speakers at a position of 6.0 m, you can place the
rear speakers within the range of 1.5 to 6.0 m. Note
that you cannot place the rear speakers farther
away from the listening position than the front
speakers.)
If you have placed the rear speakers outside of
range b in the illustration below, relocate the rear
speakers so that they are within range b.
L
LS
4.5 m
Note
If you do not press CURSOR to start the setting operations within
approximately 8 seconds after pressing SET UP, the SET UP
button goes off.
R
C S.W
RS
Input this
distance.
b
Advertisement
Table of Contents
