Upgrade Bay Cradle - HP EliteBook 8470w Maintenance And Service Manual

10.
Reverse this procedure to reassemble and install the optical drive.

Upgrade bay cradle

Description
Upgrade bay cradle (includes bezel and bracket)
Before removing the upgrade bay cradle, follow these steps:
1.
2.
3.
4.
5.
Remove the upgrade bay cradle:
1.
Downloaded from www.Manualslib.com
Remove the optical drive bracket (2).
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
Disconnect the power from the computer by unplugging the power cord from the computer.
Disconnect all external devices from the computer.
Remove the battery (see Battery on page
Remove the service cover (see
Position the computer upside-down with the right side toward you.
manuals search engine
57).
Service cover on page 59).
Component replacement procedures
Spare part number
643921-001
63