Fingerprint reader board
Description
Fingerprint reader board (includes cable)
Before removing the fingerprint reader board, follow these steps:
1.
2.
3.
4.
Remove the fingerprint reader board:
1.
2.
92
Chapter 4 Removal and replacement procedures
Downloaded from
www.Manualslib.com
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
Disconnect the power from the computer by unplugging the power cord from the computer.
Disconnect all external devices from the computer.
Remove the battery (see
Battery on page
a.
Service cover (see
Service cover on page
b.
Smart Card reader (see
c.
Optical drive (see
Optical drive on page
d.
Hard drive (see
Hard drive on page
e.
Modem module (see
Modem module on page
f.
Keyboard (see
Keyboard on page
g.
Base enclosure (see
Base enclosure on page
Position the computer with the front toward you.
Disconnect the fingerprint reader board cable (1) from the LIF connector on the system board.
manuals search engine
57), and then remove the following components:
59)
Smart Card reader on page
61)
65)
74)
76)
80)
Spare part number
684343-001
60)