Upgrade Bay Device - HP EliteBook 8570w Maintenance And Service Manual

Upgrade bay device

Optical drive
NOTE:
Computer models may be equipped with an optical drive or an upgrade bay hard drive.
All optical drive spare part kits include an optical drive bezel.
To remove the optical drive, see below.
To remove the upgrade bay hard drive, see following section.
Description
DVD-ROM Drive
DVD±RW and CD-RW SuperMulti DL Combo Drive
Blu-ray Disc ROM DVD±RW SuperMulti DL Combo Drive
Blu-ray Disc R/RE DVD±RW SuperMulti DL Drive
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5. Remove the service door (see
Remove the optical drive:
IMPORTANT:
and replacement.
1.
Position the computer upside down with the front side toward you.
2. Remove the Phillips locking screw (1) that secures the optical drive to the computer.
3. Insert a small tool (2) into the drive release opening and press the optical drive tab to the left.
Battery on page
Service door on page
Make special note of each screw and screw lock size and location during removal
54).
60).
Component replacement procedures
Spare part number
694687-001
694688-001
694689-001
694690-001
77