Reverse this procedure to install the base enclosure.
Speaker assembly
Description
Speaker assembly (includes cable)
Before removing the speaker assembly, follow these steps:
1.
2.
3.
4.
Remove the speaker assembly:
1.
Downloaded from
www.Manualslib.com
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
Disconnect the power from the computer by unplugging the power cord from the computer.
Disconnect all external devices from the computer.
Remove the battery (see
Battery on page
a.
Service cover (see
Service cover on page
b.
Smart Card reader (see
c.
Optical drive (see
Optical drive on page
d.
Hard drive (see
Hard drive on page
e.
Modem module (see
Modem module on page
f.
Keyboard (see
Keyboard on page
g.
Base enclosure (see
Base enclosure on page
Turn the base enclosure right-side up, with the front toward you.
manuals search engine
57), and then remove the following components:
59)
Smart Card reader on page
61)
65)
74)
76)
80)
Spare part number
641840-001
60)
Component replacement procedures
83