Removing Jammed Paper; Controlling The Speaker Volume; Changing The Orientation Of The Optional Customer Display; Cleaning The Printer Case - Epson tm-t88v-dt User Manual

2. Paste the enclosed 2 strips (M 1) along the roll paper guide on the bottom of
the roll paper holder. Make sure the space between the top edge of strip and
the line of the groove in the roll paper guide (indicated as a in Illustration M)
is 0.5 mm or less.
3. Install the roll paper correctly.
4. Close the roll paper cover.

Removing Jammed Paper

When a paper jam occurs, never pull out the paper forcibly. Open the roll paper
cover and remove the jammed paper.
CAUTION:
Do not touch the thermal head and the frame on its side (indicated in the circle
in Illustration N) because it can be very hot after printing.
If the roll paper cover does not open, follow the steps below.
1. Turn off the printer.
2. Slide the cutter cover toward the front to open it. See Illustration
3. Turn the knob until you see a triangle in the opening. This returns the cutter
blade to the normal position. There is a label near the cutter to assist you. See
Illustration
4. Close the cutter cover.
5. Open the roll paper cover and remove the jammed paper.

Controlling the Speaker Volume

You can control the speaker volume with the speaker volume control on the
operating system on the computer.

Changing the Orientation of the Optional Customer Display

Hold the main body with your hand and move the optional customer display to
change the direction or angle. Make sure to move it in their mobile range only.
CAUTION:
Do not rotate the customer display with excessive force. Doing so may break
the customer display.
The mobile range of the display is as follows. See Illustration Q.
❏
Arm rotation:
❏
Display rotation:
❏
Display tilt:
Cleaning

Cleaning the Printer Case

Be sure to turn off the printer, and wipe the dirt off the printer case with a dry
cloth or a damp cloth.
CAUTION:
Never clean the product with alcohol, benzine, thinner, or other such solvents.
Doing so may damage or break the parts made of plastic and rubber.
.
P
Maximum angle of 270
Maximum angle of 300
Maximum angle of 48
°
°
(4 levels, 5 positions)
°
TM-T88V-DT User's Manual 9
English
.
O