Turning On/Off The Tm-T88V-Dt; Forced Termination; Printer Operation; Installing The Roll Paper - Epson tm-t88v-dt User Manual

Hide thumbs Also See for tm-t88v-dt:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
English

Turning On/Off the TM-T88V-DT

Use the power button (See A 7.) to turn on/off the TM-T88V-DT. You can also
turn on the TM-T88V-DT through the network.
The operating system of the TM-T88V-DT has a standby mode. The system can be
set so that the standby mode can be turned on and off with the power switch. If
you turn the unit off, wait more than 10 seconds before you turn it on again.
Note:
Assign the functions to the power button through the operating system or BIOS.

Forced Termination

If you cannot turn the TM-T88V-DT off using applications or the operating
system, you can execute forced termination as a last resort. Keep pressing the
power switch for approximately 4 seconds until the TM-T88V-DT is turned off. Be
careful; when forced termination is executed, all unsaved data is lost.

Printer Reset Button

Press this button (See A 6.) with a pointed object (such as a pen) to reset the
printer unit.

Printer Operation

Installing the Roll Paper

Follow the steps below to install the roll paper. If you want to change the paper
width by using the roll paper guide, see "Changing the Paper Width" on page 8.
1.
Press the cover open button to open the roll paper cover as shown in
Illustration H.
2.
Remove the used roll paper core if any, and insert the roll paper. Illustration I
shows the correct direction of the paper.
Pull out some paper, and close the roll paper cover. See Illustration J.
3.
Tear off the paper. See Illustration K.
4.

Feeding Paper

Press the Feed button (See A 10.) to feed the paper.

Changing the Paper Width

If a roll paper guide is included with your printer, you can change the paper
width from 80 mm to 58 mm by installing the roll paper guide. Follow the steps
below to change the paper width.
CAUTION:
If you once change the paper width from 80 mm to 58 mm, you cannot
change it back to 80 mm.
You can change the paper width either on the TM-T88V-DT or through the
Network, using the TM-T88V utility.
1.
Secure the roll paper guide with the enclosed screw. See Illustration L.
8 TM-T88V-DT User's Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents