Xerox Phaser 6280 User Manual page 68

Loading Transparencies
Note:
1. After carefully fanning a small stack of transparencies, load them into Tray 1 (MPT)
2. Slide the paper guides to the size of the transparencies.
3. Pull out the output tray extension when loading paper, such as transparencies.
Printing on Transparencies
When MPT Mode is set to Panel Specified , you need to set the paper type and size settings
for the tray on the control panel in advance. See
Printing transparencies continuously may lead to the output transparencies sticking to
each other. Remove the transparencies from the output tray after about 20 sheets, and
then fan them to lower their temperatures.
Using the PostScript Driver
To print on transparencies using the PostScript print driver, display the Paper/Output tab.
1. From the File menu, select Print .
2. Select this printer as the printer to be used and click Preferences or Properties.
3. Select the Paper/Output tab.
4. From Paper Type , select Transparency .
5. From Paper Tray , select Tray 1 (MPT) .
Downloaded From ManualsPrinter.com Manuals
Transparencies with a white frame and full-color transparencies cannot be used.
with the side to be printed facing down. Load no more than 25 transparencies at a
time.
Setting Paper Types and Sizes
Phaser® 6280 Printer
68
Printing on Specialty Media
6280-011
on page 50.