Windows 2000 or Later
To install the printer driver from the Software and Documentation CD-ROM:
1. Insert the CD-ROM into the computer's CD-ROM drive. If the installer does not launch,
2. Click the Language button, select your language, and click OK.
3. Select Install Printer Driver .
4. Click I Agree to accept the license agreement, and show the Xerox Print Driver
5. Select the Phaser 6280 driver and click Install to show the Installation Options
6. Select either PostScript and/or PCL 6 and click OK.
7. Click Install to start the installation.
8. When the installation is complete, select any of the following from the Installation
9. Click Finish.
Note:
click Install PrintingScout in the Software and Documentation CD-ROM. Then follow the
wizard to complete installation.
See also:
Downloaded From ManualsPrinter.com Manuals
do the following:
a. Click Start , and then click Run .
b. In the Run window, type: <CD drive>:\SETUP.EXE .
Installation window.
window.
Status window:
•
Set Printer As Default
•
Print A Test Page
•
Share Printer
PrintingScout is a separate option from the printer driver. To install PrintingScout,
Online Support Assistant at
www.xerox.com/office/6280support
Phaser® 6280 Printer
40
Installing the Printer Drivers