Windows 2000 Or Later; Preliminary Steps; Quick Cd-Rom Install Steps - Xerox Phaser 7500DN User Manual

Network Basics

Windows 2000 or Later

This section includes:
•

Preliminary Steps

on page 36
•

Quick CD-ROM Install Steps

• Other Methods of Installation
• Windows 64-Bit Server to 32-Bit Client Installation
• Windows 2000 or Later Troubleshooting
Preliminary Steps
These preliminary steps must be performed for all printers:
1. Verify that the printer is plugged in, turned On, and connected to an active network.
2. Verify that the printer is receiving network information by monitoring the LEDs on the back of the
printer or on the CentreDirect External Print Server. When the printer is connected to a functioning
network and receiving traffic, its link LED is green, and its amber traffic LED is flashing rapidly.
Quick CD-ROM Install Steps
To install the printer driver from the Software and Documentation CD-ROM:
1. Insert the CD-ROM into the computer's CD-ROM drive. If the installer does not launch, do the
following:
a. Click Start, then click Run.
b. In the Run window, type: <CD drive>:\Setup.exe.
2. Select Install Printer Driver.
3. Select your desired language from the list.
4. Accept the license agreement.
5. Select your printer in the list of discovered printers, and click Next.
If your printer does not appear in the list of discovered printers:
a. Click the IP Address or DNS Name button near the top of the window.
b. Type the address or name of the desired printer, and click Search.
c. When the printer is displayed in the window, click Next.
6. Select the installation options you want to use, and click Install.
See also:
Online Support Assistant at
36 Phaser 7500 Color Printer
User Guide
on page 36
on page 37
on page 39
on page 40
www.xerox.com/office/7500support