Table of Contents
Advertisement
Section 7
7.4 Stereo Bi-amp w/ Dual Delay
Hardware
1. Connect the outputs from the mixer to the inputs of the DriveRack.
2. Connect the outputs of the DriveRack and run to the selected speaker amplifier.
3. Making sure that all outputs are muted, apply power to the mixer and amplifiers.
4. Make connections between the Zone Controllers (see section "6.2 ZC-Zone Controllers") and the 260.
Software
1. Select a program (Factory: 1x4 w/ 2 Zones) as a template.
2. Load the program by pressing the PROG/CONFIG button.
3. Adjust the individual parameters for the system by pressing the Processing Module buttons.
4. Using the Utility Menu, select the ID for each ZC-1 and ZC-2 Zone Controller and program its output level boost and
cut parameters.
2
MA-5002VZ
58
DriveRack® 260 User Manual
Application Guide
Left
Right
3
4
JBL AE Series
AM6315/95
JBL AE Series
ASB6128
DriveRack
5
JBL AE Series
dbx ZC-1
AC2212/95
Zone B
®
dbx ZC-2
JBL Control 25
Zone A
Advertisement
Table of Contents
