dbx 260 User Manual page 42

Section 5
Current
• If a ZC-1 or ZC-2 is selected, the display will appear something like this:
Current
Pressing the DATA wheel will give you the option of setting the range of boost. Pressing the DATA wheel
•
again will now allow you to set the desired cut range (for full boost/cut range, set boost to 10 and cut to 40; it
is a good idea to then bring down your crossover gains 10dB in order to make up for this 10dB boost). Once
the boost and cut range has been set, pressing and rotating the DATA wheel will let you select any of the six
outputs to be affected by the programmed level controller. Press the STORE button to get back to ZC Setup.
• Selecting a ZC-3 gives the ability to assign switches A-D to call up any preset in the 260. Once a ZC-3 has been
selected, the display will appear something like this:
Current
Pressing and then rotating the DATA wheel will allow you to first select the desired position (A-D). These
•
positions correspond to the rotary position labels on the ZC-3. Once the desired position has been selected, press
the DATA wheel again and rotate it to select which program will be loaded when this selection (A-D) is made
on the ZC-3. Repeat this process for all other switch position/program assignments. Press the STORE button to
get back to ZC Setup
No change means that no program will be loaded for that selection.
• Selecting a ZC-4 gives the ability to load programs using SPDT type switches. Once a ZC-4 has been selected, the
display will appear something like this:
40
DriveRack® 260 User Manual
Utilities/Meters
• ZC-1 (volume boost and cut)
ZC Setup
• ZC-2 (volume boost and cut with mute)
Panel 1 None
• ZC-3 (program change)
• ZC-4 (program change via contact closure)
(STORE) - EDIT PANEL
Panel 1
ZC Setup Boost 0dB Cut 0dB
Panel 1 None Output
1 3 5
2 4 6
(STORE) - EDIT PANEL
Panel 1
Select A
Panel 1
No Change
Boost 0dB Cut 0dB
Output
1 3 5
2 4 6
ZC Setup
Panel 1 None
Panel 1
Switch
(STORE) - EDIT PANEL
Panel 1
No Change
Select A
No Change
Panel 1
Boost 0dB Cut 0dB
Output
1 3 5
Panel 1
2 4 6
Switch
No Change
Panel 1
Select A
No Change
Panel 1
Switch
No Change
ZC-2
ZC-3
ZC-2
ZC-4
1 2 3 4
ZC-3
ZC-2
ZC-4
1 2 3 4
ZC-3
ZC-4
1 2 3 4
DriveRack
Set Security Level
Pre EQ
Low
Set Security Level
Pre EQ
Low
Set Security Level
Pre EQ
Low
®