Installing Wire Spool And Adjusting Hub Tension - Miller 3045 FC Owner's Manual

4-5. Installing Wire Spool And Adjusting Hub Tension

Installing 4 in (102 mm) Wire Spool
Installing 8 in (203 mm) Wire Spool
Use supplied spacer
if spool does not
stay on adapter
locating pin.
Use retaining ring
with 8 in. (203 mm)
spool only.
Tools Needed:
OM-1500-3 Page 14
Locating pin.
Use adapter with
8 in. (203 mm)
spool only.
15/16 in
When a slight force is needed
to turn spool, tension is set.
When a slight force is needed
to turn spool, tension is set.
802 971 / 803 012 / 803 013