Adjust Print Quality - Epson Stylus CX7300 User Manual

touch the ink cartridge ink supply port or surrounding area, and do not store the cartridge
upside down.
If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge.

Adjust Print Quality

If your print quality declines, you may need to run a utility to clean or align the print head.
Clean the Print Head
Align the Print Head
If running these utilities does not solve the problem, you may need to replace the ink cartridges.
Clean the Print Head
If your printouts become too light, or you see dark or light bands across them, you may need to
clean the print head nozzles. Cleaning uses ink, so clean the nozzles only if print quality declines.
You can check for clogged nozzles before you clean them so you don't clean them unnecessarily.
Note:
You cannot clean the print head if an ink cartridge is expended, and may not be able to clean it
when a cartridge is low. You must replace the cartridge first.
Follow the instructions in these sections to check your print head nozzles and clean them:
Check the Print Head Nozzles
Clean the Print Head Nozzles
Check the Print Head Nozzles
You can print a nozzle check pattern to check for clogged nozzles using the Epson Stylus CX7300
Series control panel or your software.
From the Control Panel
1. Load a few sheets of plain paper in the sheet feeder.
2. Turn off the Epson Stylus CX7300 Series.
3. Hold down the
the Epson Stylus CX7300 Series back on. Hold down both buttons until the
light begins to flash, then release the buttons.
Cancelar (Stop) button as you press the Encender (On) button to turn
Encender (On)
77