Removing The Original Feed Roller - Canon SmartBase PC1200s Service Manual

2.8.3.4 Removing the Original Feed Roller

1) Remove the delivery stacking tray. (See
2.8.4.1)
2) Remove the 2 E-rings [1].
3) Slide the original feed roller [2] to the
left, and remove the pin [3], gear [4],
and bushing [5]; then, detach the origi-
nal feed roller [2].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
CHAPTER 5 MECHANICAL SYSTEM
[1]
F05-208-28
[3]
F05-208-29
[1]
[2]
[4] [5]
5-63