Kyocera FS-1050 Installation Manual page 15

Envelopes
Envelopes should be fed in the face-up position, right edge first.
• Test a sample envelope on the printer and check that printing quality is
satisfactory before purchasing.
• To avoid trouble, we recommend that envelopes be delivered face-up
using the face-up tray. Refer to Step 7.
To close the MP tray
Close the flap on the subtray, then push in the subtray and close the MP tray.
No
Some types of envelopes are not suitable
for printing. For details on suitable
types of envelopes, see the Operation
Guide contained as an electronic file in
the CD-ROM supplied with the printer.
Be careful not to push the tray
back into the printer with the
subtray folded out horizon-
tally as shown in the figure.
13