Kyocera FS-1050 Installation Manual page 12

Release Button
Paper Stopper
Release Button
10
1
Pull the paper cassette all the way out of
the printer.
2
Adjust the position of the paper stopper
located at the rear of the paper cassette.
Press in the release button and slide the
stopper to the desired paper size. When
shipped from the factory, the paper cas-
sette is set to either A4 or Letter size.
3
Adjust the position of the paper guides
Paper Guide
located on the left and right sides of the
paper cassette. Press in the release but-
ton on the left side guide and slide to the
desired paper size.
When using custom size paper, move the
paper guides and paper stopper all the
way out, insert the paper, then adjust
the paper guides and paper stopper to
the size of the paper. Adjust them so that
they are in light contact with the paper.
The printer does not automati-
cally detect the size of the paper
loaded into the paper cassette
or MP tray. As a result, when-
ever you load paper having a
different size, you must reset
the paper size setting using the
Remote Operation Panel utility.
For details, refer to the Opera-
tion Guide contained as an
electronic file in the CD-ROM
supplied with the printer.