Teac DVB400 Owner's Manual page 9

Understanding the Remote Control Unit
1 STANDBY
To switch between Operation and
Standby mode.
2 TV/STB
Not used
3 SUBTITLE (Red)
To select closed caption.
Note that closed caption may not always
work as the broadcaster may not provide
this service.
4 PAGE UP/DOWN
To move up or down a page in the
channel list.
5 SOUND (Yellow)
To select the sound track list in the current
channel.
6 VOLUME UP/DOWN
To increase or decrease the volume.
7 OK
To confirm your choice.
8 EXIT
To return to the normal viewing mode from
a menu.
9 TELETEXT
To navigate teletext pages.
10 JUMP
This key will jump between the 1st service
of each network.
Note : Your DVB receiver is capable of displaying teletext on screen since it has an
embedded teletext decoder.
**AUSTEXT only available from 7 digital
DV-B400
11 MUTE
To enable or disable the audio.
12 NUMERIC BUTTONS
To select the channel and enter the
channel information and PIN Code.
13 EPG
To display the TV/Radio program guide.
14 INFORMATION (Green)
To display the program information box on
the screen.
15 PRE-CHANNEL (Blue)
To return to the previous channel.
16 CHANNEL UP/DOWN
To change channels up and down.
17 MENU
To display the Main Menu on the screen or
return to the previous menu.
18 TV/RADIO
Not used
19 ASPECT
To select your screen aspect ratio.
Press this button to toggle different modes.
20 EVENT
To select the extended event information of
the program.
21 M-View
To display multi angle view selection.
- 9 -
Digital Terrestrial Receiver