Table of Contents
Advertisement
Installation of the skirts
Triangular sealing strip at
the top
Top panel
Rafter
Refit tiles
36
Roof integration - Mönch-Nonne
Wood screw
Clamp (2 pce. per top panel)
4 x 60
Wooden spacer
height = batten
1. Hook in the casing panels on the left and right in accordance with the diagram
and secure them with clamps.
2. Push the top casing panels over the collector frame. As support on each
rafter, a wooden spacer of batten height must be fitted below the casing
panel. Secure the casing panel with clamps.
3. Push the protective edge profiles at the casing panel joint at the top over
the return, see the diagram.
4. Affix the side and top triangular sealing strip to the casing panels.
Edge protector
Side panel
Triangular
Clamp (3 pce. per side panel)
sealing strip
15-60°
Triangular sealing
strip at the top and
side
Hook in side panel
Batten
Wood screw
4 x 30
Batten
3062815_201508
Advertisement
Table of Contents
