Table of Contents
Advertisement
Collector mounting
M8
grub screw
M8
washer nut
3062815_201508
Rooftop installation of collectors
M8 x 20
combination screw
- Are all gaskets in place?
- Maintain the necessary distance
- Align all threaded fittings
- Counter hold with a second open-ended spanner max. torque 20 Nm
1. Insert the collector with the grub screws in with the lower mounting rail
according to the diagram and initially secure it with the M8 washer nut by
hand.
2. Push the M8 x 20 combination screws through the top mounting rail and
initially tighten by hand into the collector.
3. Fit additional collectors likewise.
4. Secure the fittings for the flow and return. Check gaskets.
5. Tighten all screws and nuts to secure the collector.
>15°
17
Advertisement
Table of Contents
