Rimage Everest 600 User Manual page 21

Maintaining the Everest 600 Printer
2. Access the print ribbon.
Print Ribbon
Carrier
a. Open latch 1.
b. Pull the print ribbon carrier straight out of the printer.
c. Lay the print ribbon carrier on its back.
2001474_B
Tip: Perform cleaning procedures while the print ribbon is removed. For
more information refer to the
Latch 1
21.
3. Remove the print ribbon from the carrier.
For more information visit rimage.com/support
Clean the Everest 600 Printer
Supply Roll
a. Slide the supply roll to the left.
b. Slide the take-up roll to the right.
c. Discard the used print ribbon.
section on page
Take-up Roll
18