Product Specifications; Maintenance - Vision Fitness AR700 Owner's Manual

Vision air rower

Hide thumbs

Table Of Contents

Table of Contents

MAINTENANCE

If you fail to maintain the bike as described below, it could affect or void the Vision

limited warranty.

NOTE: Safety of the equipment can be maintained only if the equipment is examined

regularly for damage or wear. Keep the equipment out of use until defective parts are

repaired or replaced. Pay special attention to parts that are subject to wear, such as the

rope.

DAILY INSPECTION

Look and listen for loose fasteners, unusual noises, and any other indications

that the equipment may be in need of service. If you notice any of these, obtain

service.

DAILY MAINTENANCE

Vision Fitness recommends the Air Rower be cleaned before and after each workout.

The following daily maintenance tips will keep your unit operating at peak performance:

1) Use a damp, soft cloth with water or mild liquid detergent to clean all exposed

surfaces.

DO NOT use ammonia, chlorine, or acid-based cleaners.

2) Keep the display console free of fingerprints and salt build-up caused by sweat.

3) Frequently vacuum the floor underneath the unit to prevent the accumulation of

dust and dirt, which can affect the smooth operation of the unit.

4) Check for dust inside flywheel with flashlight.