Sony CMT-F3MD Operating Instructions Manual page 22

Programming MD tracks
(continued)
4
Press ENTER/YES.
The track is programmed.
"Step" appears, followed by the number of
the track in the programmed sequence. The
number of the last programmed track
appears, followed by the total playing time of
the programme. If you have made a mistake,
you can clear the last programmed track from
the programme by pressing CLEAR.
Last programmed
track number
5
To programme additional tracks, repeat
steps 3 and 4.
6
Press N .
All the tracks play in the order you selected.
To check the total number of
programmed tracks
Press DISP in stop mode.
The total number of programmed steps appears.
Last programmed
track number
To check the programme order
Press . or > repeatedly during Programme
Play.
22
Total playing time
Total number of
programmed steps
To Do this
Press x, then press PLAY MODE
Cancel
Programme repeatedly until "PGM" and
Play "SHUF" disappear.
Add a track to Do steps 3 and 4.
the programme
(in stop mode)
Erase the last Press CLEAR in stop mode. Each
programmed time you press the button, the last
track programmed track is erased.
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press N.
• "Program Full !" appears when you try to
programme 26 or more tracks (steps).
• "---m--s" appears when the total MD programme
time exceeds 200 minutes.