Basic Operations; Playing A Cd - Sony CMT-F3MD Operating Instructions Manual

Basic Operations

Playing a CD

To turn on the system, press ?/1 (power).
?/1
(power)
CD indicator
1
FUNCTION
MD/CD lm/ML
1
Press CD A and place a CD on the disc
tray.
With the label side up.
When you play a single CD, place it on the
inner circle of the tray.
To close the disc tray, press CD A again.
2
Press CD HS.
The disc tray closes and play starts.
The CD HS indicator lights green.
Track number
2
VOLUME
CD s
Playing time
To Do this
Press CD s.
Stop play
Press CD HS. The CD HS
Pause
indicator lights orange. Press again
to resume play.
Press MD/CD lm or
Select a track
ML repeatedly.
Find a point in a Keep pressing MD/CD lm
or ML during play and
track
release it at the desired point.
"—OVER—" appears at the end
of the CD.
Remove the CD Press CD A.
Adjust the Turn VOLUME.
volume
Tips
• If you turn on the system when there is a CD on the
disc tray, the CD indicator lights green.
• If there is no CD on the disc tray, "CD No Disc"
appears in the display.
• Pressing CD HS when the system is off
automatically turns on the system and starts CD
play if there is a CD on the disc tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
CD HS (Automatic Source Selection).
• You can start playing from the desired track in
step 2.
1 Press MD/CD lm or ML repeatedly
until the desired track appears.
2 Press CD HS.
Notes
• Do not use a CD with tape, seals or paste on it as
this may damage the CD player.
• Do not push the disc tray to close it, as this may
damage the CD player. Press CD A to close the
disc tray.
• If you press CD A to open or close the disc tray
while listening to another sound source, the CD
indicator lights green even if there is no CD in the
tray.
To turn off the CD indicator, press FUNCTION
repeatedly to switch the function to CD.
9