Table of Contents
Advertisement
Specifications
Main Unit (HCD-F3MD)
Amplifier section
DIN power output (Rated):20 + 20 watts (6 ohms at 1 kHz,
DIN, 240 V)
18 + 18 watts (6 ohms at 1 kHz,
DIN, 220 V)
Continuous RMS power output (Reference):
25 + 25 watts (6 ohms at 1 kHz,
10% THD, 240 V)
23 + 23 watts (6 ohms at 1 kHz,
10% THD, 220 V)
Peak Music Power Output: 400 watts
Inputs
TAPE IN (phono jacks):
voltage 250 mV, impedance
47 kilohms
Outputs
TAPE OUT (phono jacks): voltage 250 mV, impedance
1 kilohm
PHONES (stereo minijack):
accepts headphones of 8 ohms or
more.
SPEAKER:
accepts impedance of 6 to 16
ohms.
CD player section
System
Compact disc and digital audio
system
Laser
Semiconductor laser (λ=780 nm)
Emission duration: continuous
Max. 44.6 µW*
Laser output
*This output is the value measured
at a distance of 200 mm from the
objective lens surface on the
Optical Pick-up Block with a
7 mm aperture.
Frequency response
2 Hz – 20 kHz
MD deck section
System
MiniDisc digital audio system
Laser
Semiconductor laser (λ=780 nm)
Emission duration: continuous
Max. 44.6 µW*
Laser output
*This output is the value measured
at a distance of 200 mm from the
objective lens surface on the
Optical Pick-up Block with a
7 mm aperture.
Sampling frequency
44.1 kHz
Frequency response
5 Hz – 20 kHz
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 – 108.0 MHz
(50 kHz step)
Aerial
FM lead aerial
Aerial terminals
75 ohms unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
531 – 1,602 kHz
(with the interval set at 9 kHz)
530 – 1,710 kHz
(with the interval set at 10 kHz)
Aerial
AM loop aerial
External aerial terminals
Intermediate frequency
450 kHz
Speaker (SS-CF3MD)
Speaker system
2-way, bass-reflex type
Speaker units
Woofer:
12 cm dia., cone type
Tweeter:
2.5 cm dia., balanced drive type
Nominal impedance
6 ohms
General
Power requirements
110 – 120 V or 220 – 240 V
AC, 50/60 Hz
Power consumption
70 watts during normal operation
Approx. 3 watts in standby mode
(clock displayed)
Approx. 1 watt in standby mode
(clock not displayed)
Dimensions (w/h/d) incl. projecting parts and controls
Amplifier/Tuner/MD/CD section:
Approx. 215 × 150 × 335 mm
Approx. 156 × 250 × 241 mm
Speaker:
Mass
Amplifier/Tuner/MD/CD section:
Approx. 4.9 kg
Speakers:
Approx. 2.7 kg net per speaker
Supplied accessories
Remote (1)
R6 (size AA) batteries (2)
AM loop aerial (1)
FM lead aerial (1)
Speaker cords (2)
Design and specifications are subject to change
without notice.
59
Advertisement
Table of Contents
