Messages - Sony CMT-F3MD Operating Instructions Manual

Messages

One of the following messages may appear or
flash in the display during operation.
MD
Auto Cut
The MD deck is pausing the recording because
silence continued for 30 seconds or more during
digital recording.
Blank Disc
The inserted recordable MD is new, or all
tracks on the MD have been erased.
Cannot Edit
• A pre-mastered MD is in the deck.
• You tried to edit in Programme or Shuffle
Play mode.
Cannot REC
• A pre-mastered MD is in the deck.
• The function is switched to MD.
Complete !!
The editing operation of MDs is completed.
Disc Full!!
There is no time remaining on the MD.
Eject
The MD deck is ejecting the MD.
Impossible
• You tried to make an impossible editing
operation.
• You cannot combine the tracks due to the
system limitations of MDs.
Name Full !!
There is no more space to store track or disc
titles.
No Disc
There is no disc in the MD deck.
No Name
You tried to show the title of a non-labelled
disc or track.
—OVER—
You have reached the end of the MD while
keep pressing MD/CD ML during playing
pause.
58
Push STOP!
You pressed PLAY MODE during play.
—Rehearsal—
The MD is playing the specified dividing point
for confirmation during the Divide function.
Smart Space
The signal was input again after silence
continued for 3 or more but less than 30
seconds during digital recording.
Standby (flashing)
The timer settings have disappeared over time
and are not available for saving to disc, or
Program Play could not be activated since the
program has disappeared over time.
Text Protect
There is CD TEXT information which cannot
be recorded on the MD.
TOC Reading
The MD deck is reading the TOC information
of the MD.
TOC Writing
The MD deck is writing the information of
recorded or edited contents.
Track End
You have reached the end of the track while
adjusting the dividing point during the Divide
function.
TUNER
Cannot Edit
You tried to label or erase a non-preset station.
CD
Name Full !!
There are already 50 disc titles stored in the
system.
—OVER—
You have reached the end of the CD while
keeping pressing MD/CD ML during
pause.