System Error: 060300; System Error: 060400; System Error: 060500; System Error: 07Xxxx - HP DesignJet 2500CP Service Manual

System Error:
Problem Description: Incompatible Firmware and Line Sensor.
Corrective Action:
System Error:
Problem Description: Incompatible Carriage PCA and Line Sensor OR
Corrective Action:
System Error:
Problem Description: Line Sensor not calibrated.
Corrective Action:
System Error:
Problem Description: Firmware Error.
Corrective action:
System Error Codes
060300
Upgrade the Firmware.
060400
Line Sensor not calibrated after replacing Carriage
Assembly.
Try the following:
D Calibrate the Line Sensor ' page 5 9.
D Replace the Carriage Assembly ' page 8 42.
060500
Calibrate the Line Sensor ' page 5 9.
07xxxx XXXXXXXX
Make sure you have the latest version of the Flash
SIMM (firmware) installed or upgrade the
firmware revision of the Flash SIMM ' page 1 3. If
the error code remains after installing the latest
Flash SIMM then report the error to the HP
Response Center or the nearest HP Support Office,
stating the following information:
D Model and Serial Number of the printer.
D the complete error number (07xxxx XXXXXXXX).
D service print (Utilities / Service Tests).
D plot file where the error has occurred.
D additional comments about the usage, the
setting, etc..
HP DesignJet CP Series Printers 2-29