HP DesignJet 2500CP Service Manual page 78

Message Explanation and Action
Printhead removed The printer has detected that one or more printheads have
JJ-J
the printer cannot detect them, as indicated by the flashing squares.
Press
ink system.
If you don't correct the error now, you will see the status message "Ink
system error".
Printing The printer cannot print, because of errors previously notified.
disabled
Press
erroneous ink systems in order to print with your printer again.
Pull You are aligning roll media.
Align edges to
Grasp the left and right free edges of the roll media and pull them towards you
roll
until the media is taut. At the same time, align the left and right edges of the
media so that they are flush with the left and right edges of the roll.
Reload media There was an error loading the media and the printer has ejected it. The printer is
waiting for you to reload the media.
Reload the media.
Reload sheet Sheet media was loaded skewed and the printer ejected it.
Reload the sheet.
Remove all You have selected the option
menu, and opened the left door when instructed.
ink cartridge(s)
The printer is instructing you to remove all the ink cartridges.
Remove all You have selected the option
printheads menu, and lifted the window when instructed.
The printer is instructing you to remove all the printheads.
Remove head You have selected the option
menu, and opened the right door when instructed.
cleaners
Close right door
The printer is instructing you to remove all the printhead cleaners, and then close
the right door.
Remove media The ink is dry.
Remove the accuracy calibration print that has just been produced.
Press
Remove media An attempt to load media was made while the media lever was lowered.
Lift lever
Remove the media, lift the lever, and reload media with the lever up.
3-12
HP DesignJet CP Series Printers
to continue. You should reseat the printheads immediately or replace the
to continue. Then press the Replace Ink System key to replace the
Utilities / Transport mode of the front-panel
Utilities / Transport mode of the front–panel
Utilities / Transport mode of the front–panel
to continue with accuracy calibration.
become dislodged or
User Messages